Stránka 1 z 1

Jak se dostat do BIOSu

Odeslat příspěvekNapsal: 28. 6. 2009 22:28
od lukasjakrtek
Zdravím,
mám pucený starší ntb -> http://wopoxriders.uvadi.cz/report.htm
ale mám problém, nevím jak se dostat do biosu, když PC startuje tak se objeví pouze 5 ikonek a při stisku DELETE si mezi nimi vybírat. Ty ikonky představují Boot z LAN, CD, HDD.. ale USB tam neni. JAk se tedy mám dostat do klasicekéo BIOSu?

Re: Jak se dostat do BIOSu

Odeslat příspěvekNapsal: 28. 6. 2009 23:52
od LeClair
Do biosu se leze i přes jiné kláves.

Třeba se bude hodit i ostatním:

Acer - Ctrl+Alt+Esc
Compaq - F10
Compaq Presario - Press <Alt> <Ctrl> <Esc> at boot when you see the "Compaq" log in big letters
Dell - F1 or Del.
Gateway 2000 - F1, many also use F2
Hewlett Packard - F1
IBM
Older Models - In order to get into the configuration of the IBM setup screen (CMOS) screen you need to hold down both mouse buttons during boot-up.
Aptiva - Press F1
Leading Edge
Fortiva 5000 - <Cntrl> <Alt> <A> or <Cntrl> <Alt> <S>
NEC - F2
Packard Bell - F1 or F2
Sharp Laptop 9020 - F2
Sony - F3, then F2, or F1
Tandon computers - Hold down the <Esc> key after turning on power
Toshiba Laptops - Toshiba Utility, on selected models you can hold the ESC key during boot which will then prompt you to press the F1 key to enter the BIOS.

Re: Jak se dostat do BIOSu

Odeslat příspěvekNapsal: 30. 6. 2009 13:06
od lukasjakrtek
Dík, Toshuïba- F1